Norseman Aerial Rigging Insulators

For converting high tensile yacht rigging into antennae for transmission and reception, Norseman Insulators provide a completely secure method of converting yacht backstays into aerials.  They have been approved by Lloyd's for many years and the Norseman Insulator is recommended by leading marine electronic distributors.

Insulators are manufactured from marine stainless steel to specification 316 Stainless Steel for the end fittings, an approved insulant, and anodised high strength aluminium.  Fully tested in an approved environmental laboratory, electrical performance was found satisfactory after exposure to salt spray and to 95% humidity at 35°C for four periods of seven days.

Norseman Aerial Rigging Insulators

N50 Eye to Eye N53 Swageless Terminal to Terminal
N50 Eye to Eye N53 Swageless Terminal to Terminal
N51 Eye to Swageless Terminal N54 Eye to Swage Terminal
N51 Eye to Swageless Terminal N54 Eye to Swage Terminal
N52 Fork to Swageless Terminal N55 Swage to Swage
N52 Fork to Swageless Terminal N55 Swage to Swage

 

Size
Ref.
Wire
Dia.
H T W N50
L1
N51
L2
N53
L3
N55
L4
N54
L5
N52
L6
Breaking Load
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
-050 5 9.7 8.0 29.0 152 178 211 290 220 190 2440
-060 6 11.3 9.5 29.0 165 198 229 315 238 203 3550
-070 7 13.0 10.8 33.0 185 216 241 360 271 215 4910
-080 8 16.0 12.5 33.0 191 229 262 376 283 218 6150
-100 10 16.0 13.5 44.0 365 308 308 510 402 253 9770
-110 11 19.2 18.0 44.0 277 341 401 598 443 535 12100
-120 12 19.2 18.0 44.0 277 341 401 640 465 535 14400
-140 14 22.5 21.0 57.0 381 473 514 820 607 465 19300
-160 16 25.7 24.0 57.0 406 479 552 844 638 499 25600
-190 19 29.0 25.7 63.5 487 549 610 999 753 563 32000
NOTE:-
Swageless Terminals can be used with 3 different types of cable - this is designated at the end of the part number as follows:-

-1 = 1 x 19 Strand;   -7 = 7 x 19 Rope;   D = Dyform Strand